Ultimate Bambu Bed Scraper (Dual-Mode)

Check out my new CubicPets collection:

https://makerworld.com/collections/27840978

____________________

Here is a compact and ergonomic dual-mode bed scraper, designed to help you cleanly release your prints while taking care of your build plate.

As always, I engineered this with simplicity, performance, and efficient printing in mind. I hope you enjoy it! ❤️

Model features

✅ Dual mode: Use the original stock steel blade, or print yourself a plastic blade.

✅ Stock hardware only: Uses the scraper screws provided with your printer.

✅ Ergonomic design with optimal blade and handle angles.

✅ Compact and sleek design inspired by Bambu Lab hardware.

✅ Print-optimized: fast and efficient printing, with no supports.

Same scraper, two modes

How to use it?

1️⃣ Let it cool: Let the build plate cool down for a bit.

2️⃣ Find a corner: Gently slide the scraper underneath one of the corners of the model.

3️⃣ Leverage, don't chisel: Lift up the model using the scraper as a lever.

Please notice

⚠️ Despite the name, bed scrapers shouldn't actually be used to scrape. They are designed to wedge into the microscopic gap beneath a corner and then lift up the print from a single point of leverage without damaging your build plate coating.

____________________

Show your appreciation

Hi! I'm Carles. I dedicate countless hours to creating and maintaining free models like this. If you enjoy them, please consider supporting my work through one of the following options:

💡 You can also make a one-time donation, by joining a Membership for just one month.