M4A4 | Asiimov - 3D Printed Wall Art

M4A4 | Asiimov - 3D Printed Wall Art

Bring the iconic sci-fi styling of Asiimov into your gaming setup with this multicolor M4A4 wall-art piece.

4-color model: This design uses a maximum of four colors, making it fully printable with an AMS or another four-color printing setup.

Designed as a flat decorative display, the model combines the recognizable M4A4 silhouette with bold white and light-gray panels, vivid orange accents, and strong black technical details. The textured first layer gives the finished piece an authentic 3D-printed surface that looks especially good under directional lighting.

The included print profile is set up at approximately 386 mm in length. If your printer has a smaller build plate, you can scale the complete model down uniformly in your slicer. Make sure every part is selected before scaling so the proportions and alignment remain unchanged.

All color changes take place within the first four layers, so it is a relatively quick and efficient multicolor print.

Printing tips

• Use a textured PEI plate. Its textured surface helps visually blend or "squish" adjacent colors together and gives the visible front a cleaner, more unified finish.
• Wash the build plate thoroughly before printing. The first layer contains many small details, so a clean plate is important for reliable adhesion.
• Make sure your first layer is properly calibrated for crisp details and consistent color boundaries.
• Remember that the build-plate side becomes the visible front of the finished wall art.

Mounting

• I mount my prints using 3M double-sided tape applied to the back.
• Use enough tape to support the model and make sure it is suitable for your wall surface.
• Test the tape in an inconspicuous area first, as removal may affect delicate paint or wallpaper.

This model is intended as decorative wall art only. It is a stylized, non-functional display piece and is not a replica weapon.

If you print it, I would love to see your make and how it looks in your setup.