Filling Station for King Size Cones (110mm) Set
Print Profile(1)
Description
🌿 Filling Station for King Size Cones (110mm) | 3-piece Set
This practical and well-designed filling station makes filling pre-rolled King Size Cones (110 mm long) a breeze. No more mess on the table – clean, fast, and extremely economical to print!
🎯 Perfect Compatibility
The design is made to work optimally for various types of 110mm cones:
- Traditional Standard Cones with a regular paper filter.
- Cones with an adhered activated carbon filter (such as the popular Cone+ with CTIP Filter).
📦 What's included in the set?
The design consists of three perfectly coordinated parts:
- The Holder: This is where the empty cone (whether standard or activated carbon) is securely and precisely inserted.
- The Filling Attachment (Funnel): Simply placed on top of the holder. This allows the material to be filled cleanly and without loss.
- The Packing Stick: A small tool to gently compress the material in between fills.
✨ Smart Feature: At the top edge of the holder there are three practical cutouts. Through these, you can easily grasp the filled cone and remove it undamaged.
⚙️ Print Information & Settings (100% Ready to Print!)
This model is designed extremely efficiently and saves your filament budget! The uploaded print profile is 100% ready-to-print configured. You don't have to adjust anything – just download, send to the printer, and get started (Plug & Play)!
| Property | Detail |
|---|---|
| Print Profile | 100% Print Ready – Just load & print! |
| Layer Height | Dynamic Layer Height for the best mix of quality and speed (activated in the profile) |
| Support Structures (Supports) | Almost completely printable without supports – the few necessary supports are already perfectly defined in the profile! |
| Print Time | approx. 1.5 hours |
| Material Consumption | only approx. 18 grams! |
| Tested Printer | Bambu Lab A1 |
| Tested Material | Transparent Filament (PLA/PETG) |
🛠️ Instructions for Use
- Insert empty King Size Cone (110mm) into the holder.
- Place the filling attachment (funnel) on top.
- Fill material and gently pack it down with the included stick in between.
- Remove the funnel and easily grasp and pull out the finished cone through the three side cutouts.
Happy printing! If you like the model, I'd appreciate a like and a picture of your make!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)