Timmy (Shaun the Sheep) - 21 cm - Without AMS

Serie completa the judiging zoo al seguente link, clicca sull'immagine:

Timmy the Sheep - Easy Manual Multicolor (NO AMS) 🐑

Have you always wanted to print beautiful multicolor models but don't have an AMS? No problem! This Timmy the Sheep model (from Shaun the Sheep) is specially designed to be printed in multiple colors without the need for an AMS, using simple manual filament swaps.

At its default scale, the finished figure stands at 21 cm tall, making it a perfect, high-quality display piece!

🛠️ Printing Instructions & Manual Filament Swaps

This model is designed to be printed vertically with horizontal layer lines, giving it a clean and smooth finish.

To get the perfect multicolor look, you only need to program filament change pauses in your slicer (such as Bambu Studio or OrcaSlicer) at the specific layers where the colors transition.

• Total Height: 21 cm ($210\text{ mm}$)
• Filaments needed: White and Black (plus a tiny touch of grey/black details if you want to paint the pupils, or you can print them as separate layers).

💡 Tip: If you are using Bambu Studio, simply slice the model, slide the layer preview bar to the height where the color changes, right-click, and select "Add Pause" (or "Add Filament Change" if your printer supports manual swapping).

⚙️ Recommended Print Settings

• Layer Height: $0.16\text{ mm}$ or $0.20\text{ mm}$ (lower layer height makes the horizontal print lines even less visible!).
• Infill: 10% to 15% (Gyroid recommended).
• Supports: May require minimal supports under the chin and the thumbs-up hands depending on your printer's bridging capabilities.
• Wall Loops: 3 for a sturdier finish.

If you like this model, please leave a ⭐⭐⭐⭐⭐ review and upload a photo of your print! Happy printing!