Expandable 42HP Eurorack Case (2 to 4 Rows)
Print Profile(1)
Description
Description
This is a fully modular, 3D-printable Eurorack case system designed to grow with your synth collection. The system is highly versatile and allows you to expand your setup from a compact 2-row minimum up to a 4-row powerhouse.
⚙️ Design & Hardware Specs
- Width: 42HP per frame
- Expandability: Modular height from 2 to 4 rows (tiers).
- Hardware Required: Standard M3 screws and bolts
Horizontal Expansion: Each module/frame segment can be securely connected to its left and right neighbors using M3 screws.
🛠️ Assembly & Printer Notes (Read Before Printing!)
- Hardware: You will need M3 screws and matching nuts/bolts to assemble the frame pieces and mount your Eurorack modules.
- The "Tight Fit" Warning (⚠️): Please note that due to the compact and expandable nature of this 3D-printed design, mounting the Eurorack modules—especially those near the outer edges/borders—can be quite tricky and tight.You will need a bit of patience, a thin screwdriver, and a steady hand to get those edge screws secured.
- Print Settings: I recommend printing this with at least 3 wall loops and 15-20% infill (Gyroid) for structural rigidity, as Eurorack modules and cables can add significant weight. PETG or tough PLA is recommended.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)