Abarth Schablone - Detailing

Abarth stencil for detailing on floor mats or in the trunk to elevate vehicle preparation to a new level.
 

Dimensions: 
Outer edges: 204mm * 200mm * 0.6mm

 
How it works:
After cleaning the floor mat, the pile (the upright fibers) of the mat is brushed in one direction with a brush.

Then, the stencil is placed on the mat and brushed over the stencil's openings in the opposite direction to the previously brushed direction. Afterwards, you can brush back any contours created by the outer edge of the stencil and finally fix the entire design with a little hairspray.
Note: Pay attention to the viewing angle from which you look at the floor mat; from this angle, you brush towards or away from yourself to achieve the best possible contrast.

I use 12mm neodymium magnets to secure the stencil. These are available affordably from common online shops (Aliexpress, Amazon, Ebay).
I have also since created a storage container for it.
https://www.amazon.de/s?k=12mm+neodym+quader

Of course, the logo only lasts until someone steps on it with shoes 😉 but when handing over to the customer after detailing (or for exhibitions or similar events), it's a nice detail.