Search models, users, collections, and posts
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
1.4 h
1 plate
0.2mm layer, 2 walls, 15% infill
Designer
1.8 h
1 plate
Open in Bambu Studio
Boost
148
343
18
1
278
227
Released
Description
1xDrawer / 2xDrawer for Extrudr spools with labelling field.
The spools are holded by neodym magnets (d: 10mm, h: 10mm). you can rotate each attached spool seperatly.
You can attach as many spools as you want and remove or re-sort them anytime as well.
Spool dimensions:
outer diameter: ~200 mm
inner diameter: ~104.6 mm
spool hole diameter: 53 mm
spool height: 66 mm
required:
- I have used M4 x 25 mm screws but shorter screws should work too.
- Neodym magnets (d: 10mm, h: 10mm). For each spool are 2 magnets required and additionally 1 magnet for the base.
Print Settings
Printer:
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.3
Infill:
20-30 %
Notes:
printing time per drawer: ~ 2h,
printing speed: 100 mm/s
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (18)