Handheld Rubber Band Bow and Arrow V2

This is V2 of the original model.

A fast‑printing, handheld Rubber Band Bow and Arrow designed for quick setup, smooth firing, and fun target practice. This model is print‑in‑place, requires no supports, and finishes in about 20 minutes on most printers.

Key Features

• Print‑in‑Place Design — No assembly required.
• No Supports Needed — Clean, reliable prints on any machine.
• Fast 20‑Minute Print — Great for quick gifts or demos.
• Rubber Band Powered — Twist for more tension and stronger shots.
• Target‑Friendly — Works great with cardboard or foam targets.
• Strong Grip - Works well with hurting hands.

Print Settings

• Layer Height: 0.2 mm
• Walls: 2–3
• Infill: 10–20%
• Brim: None
• Skirt: 1 loop recommended
• Supports: Not recommended

How to Set Up the Bow

1. Create a small loop at one end of the rubber band.
2. Twist the band several times — more twists = more power.
3. Hook the loop onto the opposite side of the bow.
4. Load your arrow and fire at a safe target.

Video Tutorial:

Arrows Not Sticking? Try This Version

If your arrows aren’t sticking into the target, use the Extra Sharp Arrows V2 Model

https://www.printables.com/model/1622541-sharper-arrows-for-rubber-band-bow-arrow-v2-print

Safety

Do not fire at people, pets, or fragile objects (windows, screens, etc.).
Use only with safe targets like cardboard or foam.

Support Fonn Prints

 If you like the model, consider giving a tip to support Fonn Prints and help us with future models and more!