Industrial Gear Clock – Modern Desk Clock

This modern gear desk clock combines an industrial look with a simple assembly. ⚙️
All necessary components are fully printed. Additionally, only a suitable Bambu Lab clock movement is required. 🕒

Assembly

After printing, first press the three connectors into the stand.
One of the connectors is slightly shorter than the other two and therefore belongs in the middle position. 🔧

Then, the main part can be carefully pressed onto the connectors of the stand.
After that, the dial is glued precisely onto the main plate. The middle gear is also inserted into its designated recess and glued in place. 🧩

Now, the Bambu Lab clock movement is placed from behind into its designated slot.
Then, the hands are pressed onto the shaft of the clock movement. Press them on far enough so that the clock movement sits relatively firmly in its position. 🕰️
Finally, only the back cover is placed on, and the clock is finished. ✅

❗❗Important Print Notice❗❗

For the cleanest and most accurate result, the model should definitely be printed with the slicer settings I have adjusted.
The settings have been specifically tailored to the individual components and ensure an optimal fit and a high-quality print result. 🖨️

Happy printing and decorating ✨

Here you can find more decorative models: