Radio Shack Robie - Replacement Battery Cover
Print Profile(1)
Bill of Materials
Description
Replacement battery cover and coin reservoir plug for the vintage Radio Shack Robie coin bank. Designed to fit the original retaining tabs and restore the missing bottom panel while keeping both the battery compartment and coin reservoir securely closed.
I printed mine in TPU for AMS, which is relatively stiff, but other flexible materials should also work. The file includes a few small supports. They are likely unnecessary, but I left them in for reliability.
Installation: Slide one side under the retaining overhang first. Flex the cover slightly so the opposite side can slide underneath the overhang on the other side. Once both sides are seated, press on the front lip to line up the plug and push it securely into the coin reservoir opening.
A flexible filament is recommended because the part needs to bend during installation.
Test-fitted on Radio Shack Robie
Test-fitted on Radio Shack Robie.
Boost Me (for free)
Boost me if you like my models! It lets me get more filament to do more test prints!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)