Би-2 Coffee Coaster

☕ Би-2 Coffee Coaster

A clean, minimalist 100 mm coffee coaster featuring the iconic Би-2 logo as a separate insert. The two-piece design makes it easy to achieve a crisp multi-color result while keeping the print simple and reliable.

Included Print Profiles

🟢 Profile 1 – AMS (2 Plates)

Prints the coaster and insert on separate plates. The insert is automatically printed two colors using AMS—simply start the print and let the printer handle the color changes.

🟡 Profile 2 – No AMS (2 Plates)

Designed for printers without AMS. A filament change pause is added before printing the insert, allowing you to manually swap colors and still achieve the same clean two-color result.

🔵 Profile 3 – AMS (Single Plate, Print by Object)

Both parts are placed on a single build plate and printed using Print by Object, allowing the coaster and insert to be completed in one print while still producing a clean multi-color result.

Recommended Print Settings

• Layer Height: 0.20 mm
• Infill: 100%

For the best durability and heat resistance, PETG is recommended, especially if you'll be placing hot drinks on the coaster. PLA will work, but PETG is the better choice for everyday use with hot mugs.

The insert is designed for a snug friction fit. Depending on your printer's calibration, a small amount of pressure may be needed to seat it fully.

If you print one, I'd love to see your Make!

If you enjoy the design, a Boost is always appreciated—it helps support future projects and fuel future designs. ☕