Anker SOLIX C300x DC — Vehicle & Wall Mount
Print Profile(1)
Description
Secure vehicle & wall mount cradle for the Anker SOLIX C300x DC.
Anker SOLIX C300x DC — Vehicle & Wall Mount Cradle
Keep your C300x DC secure, accessible, and ready to go. This custom cradle holds the unit on its back with the panel and all ports facing up — and thanks to the four screw holes in the back, you can also mount it upright on a wall, perfect for RVs and van builds.
The top lantern stays fully usable through the 85 mm end opening. A simple strap system (under-body channels + side notches) locks the unit in place and the whole cradle to its mount. C300x locks in place without straps also.
Print settings
- PETG or PLA
- 2–6 perimeters (walls) for strength
- 0.2 mm layers, 20–30% infill
- Supports required for the strap notches on the bottom — otherwise support-free
Installation
Insert the device at an angle, top end (lantern side) first, then lower the base into place.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (1)