1/64 scene accessories: clutter box

[1:64 Universal Accessories Series]

Easily build car scenes!

[Clutter Box]

A stack of cardboard boxes, with two lidded storage boxes at the bottom, a courier box on top, and another open box containing books and a wine bottle

Place this pile of clutter boxes in a corner of your small scene to make it look more lifelike

Accessories for this scene: [Ten Centimeters] 1/64 Scene: Collector's Garage - Free 3D Printed Model - MakerWorld

The structure of this model is my original design, which has undergone multiple tests and modifications to ensure exquisite details, high printing success rate, and playability

For the ultimate FDM miniature prop experience, a 0.2mm nozzle is required

Suitable for hardcore 1:64 scale modelers who pursue high precision; beginners should proceed with caution

Print Profile
1、0.2mm nozzle (0.4mm cannot print details such as the wine bottle neck; forcing 0.4mm will result in a blob);

2、Single color does not require AMS;

Printing Instructions

1、The wine bottle neck requires very slow printing for good results, try not to change the speed parameters;

2、Studio will prompt to add supports (the upper cardboard box corner has about 1mm overhang), but supports are not necessary here, and the effect is generally mediocre;

3、Figure 2 shows the coloring effect after single-color printing (painted quickly with acrylic markers)

Filament in the image

Bambu Lab PLA Matte Desert Yellow

Silk filament is not recommended as it easily causes clogging of the 0.2mm nozzle; for 0.2mm, try to use Bambu Lab original filament