Search models, users, collections, and posts
Ender 3 V2 ZAxis Stabilizer
IP Report
Print Profile(1)
0.2mm layer, 6 walls, 25% infill
Designer
23 min
1 plate
Open in Bambu Studio
Boost
147
293
14
1
686
116
Released
Description
None of the existing z-axis stabilizers for the Ender 3 V2 fit correctly or used M5 bolts with drop-in t-nuts to attach so I created my own.
You'll need (2) M5 x 8mm bolts and t-nuts and a 8mm x 22mm x 7mm ball bearing.
The bearing is tight so you can mount it upside down. Depending on where you place the seams you may need to tap in in with a hammer.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
20%
Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.
If you like this project, please don't forget to ❤ Like, ★ Rate, and 🚀 Boost!
Boost Me (for free)
If you find this model useful please consider sending a boost my way as it really encourages me to keep designing.
* Some of the links above may be affiliate links
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (14)