Hex Key Holder (Metric)
Print Profile(2)
Description
The holder for my hex keys finally gave out so I designed a replacement.
I've included a 3MF file setup for dual color printing.
Printing Tips
Print at ≤ 0.16mm layer height for crisp text (I printed at 0.12mm).
Print outside walls first. There is a small bit of tolerance built into the model but your hex keys might not fit if you print inside walls before outside walls.
Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.
If you like this project, please don't forget to ❤ Like, ★ Rate, and 🚀 Boost!
Boost Me (for free)
If you find this model useful please consider sending a boost my way as it really encourages me to keep designing.
* Some of the links above may be affiliate links
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)