Perfect 200% Dummy 13

I'm happy to announce but this is one of only a few high quality remix of Vasichkins dummy 13 but at 200%, perfectly tweaked setting for ABS and pla matte. 

I got sick of trying to find a good 200% dummy 13 file with all the right settings hence why i made this file, you shall find all the right settings and layer hieghts for this model

ABS-GF is not recommended because i wasted 500g on the frame alone on test prints, but if your stubborn and want to still use it here are some instructions on how to fit it together.

There is a lot of force needed to put this thing together so BE CAREFUL okay.

BE VERY CAUTIOUS WITH ASSEMBALLY due to the tension and stiffness of ABS-GF, if tolerences are too tight then:

1.Fill bowl with boiling water
2. dip joint in water for 30 seconds

3. take parts out of water and join them while hot

4. leave joined parts untill cooled

HANDLE HOT WATER WITH CAUTION!! ⚠️ 

also make sure to take a momet to visit my other models

 you engoy this model, than leave a rating. also please boost and follow!!