Forest Pikachu EX 3d Pokemon Card
Print Profile(1)
Description
Project: forest pika.jpg
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 127x177.03mm in size
You may print at higher layer heights below the Base Thickness of 0.52mm
The Max allowed Thickness is 2.36mm and the Actual Thickness is 2.36mm
#080a0d PLA BambuLab Basic Black Transmission Distance: 0.3
#9d432c PLA BambuLab Basic Brown Transmission Distance: 2
#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.92mm) swap to Brown
At layer #14 (1.24mm) swap to BambuLab Green
At layer #18 (1.56mm) swap to Yellow
At layer #24 (2.04mm) swap to Jade White.
AMS for the model.
Optional cut to print the 3d model separately. Glue is required for the separate parts.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)