Wire Snippers Holder for Ikea Skadis Board
Print Profile(1)
Description
I ordered a set of ARC-PEGLAGO panels for my P1P so I needed a way to attach things to it. This is the second model I've created so that I can attach wire snippers to the printer.
To attach the holder to the Skadis panel I used the excellent Skadis T-Nuts Mounting System. I've provided both the original M2 T-nuts and my own remix that uses heat set inserts.
You will need to print the snippers holder and one of the T-nuts of your choosing.
Required hardware
(1) M2 x 12-14mm socket head screws
(1) M2 nuts (if using the M2 nut version of the T-nuts)
(1) M2 x 3.0mm L x 3.6mm OD or (1) M2 x 4.0mm L x 3.6mm OD heat set inserts (if using the heat set version of the T-nuts)
* Some of the links above are Amazon Affiliate links
Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.
If you like this project, please don't forget to ❤ Like and ★ Rate!
Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.
If you like this project, please don't forget to ❤ Like, ★ Rate, and 🚀 Boost!
Boost Me (for free)
If you find this model useful please consider sending a boost my way as it really encourages me to keep designing.
* Some of the links above may be affiliate links
This remix is based on
License
Comment & Rating (3)