Custom K'nex Zelda Train

This is my own custom k'nex train. this will require the following items to be purchased per car (zero car not included):

7 - M3 .50x18 screws. one needs to be cut down to fit for the front connector.

14 - M3 .50x10 screws

4 - 695 bearings. I recommend these ones: https://west3d.com/products/berserker-695-2rs-abec9-grade-bearings-hybrid-ceramic-bearings-s695c-2rs the shields should be removed and then clean with IPA

8 - 5x8x2.5mm bearings.

10 - M3x4x5 Brass Insert Nut. https://www.amazon.com/dp/B0D7M3LJDL?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1.

these inserts will go in the 4 holes for the floor, the front of the car base, each side of the wheel bogie cross bar, the wheel mount for the base and the back of the base to connect more cars.

1 - 5x9.5x4 mm flanged bearings

1 - Duco Cement to glue on the walls. https://www.amazon.com/Duco-Cement-Multi-Purpose-Household-Glue/dp/B07THL5QX1/ref=sr_1_1?dib=eyJ2IjoiMSJ9.xTDBCxTUQQ8RnMzh3RZbltZm-yvdScibWgnsrAbIpjO1fRXA0bvNVqeRDSbrTdOTsmGx5e2sV8F4Rmd2fejZAQtPV7MRuOnmB8nzneKiVXTgCAjRIB9tEHN5bvqmEm9nG5nAO0wpdPFKzAP37cnFiJCqgyIzFzdXUb1cOCLut_tm2yxjcbSuaPb0mfgfagP-viHBSSVlymbFeo-RNoLwVEUR5KP-aCerTFcTrbrCWEg.DCrIKfSdV6LmuBL0hsRAPEqyDKS6n5j1Ien_6UDID2A&dib_tag=se&hvadid=693350974059&hvdev=c&hvexpln=67&hvlocphy=9030795&hvnetw=g&hvocijid=8602713081815032479--&hvqmt=e&hvrand=8602713081815032479&hvtargid=kwd-307990685930&hydadcr=24664_13611849&keywords=duco+cement&mcid=55cd33ab8eda31b4a94d6e6f02b91ca9&qid=1783385694&sr=8-1

Zero Car.

6 - M3 .50x18 screws

9 - M3 .50x10 screws

1 - 5x9.5x4 mm flanged bearings

4 - 695 bearings. I recommend these ones: https://west3d.com/products/berserker-695-2rs-abec9-grade-bearings-hybrid-ceramic-bearings-s695c-2rs the shields should be removed and then clean with IPA

8 - 5x8x2.5mm bearings.