Bosch GOF 1250 CE L-BOXX Organizer
Print Profile(1)
Description
Bosch GOF 1250 CE – L-BOXX Organizer (Wrench Holder & Template Guide Holder)
This set optimally utilizes the existing space in the original Bosch L-BOXX of the GOF 1250 CE
The two holders ensure better organization and prevent accessories from lying loose in the case. Both models exclusively use unused space and can be installed without modifications to the original case
Included are
🔧 Wrench Holder
The holder securely accommodates the original open-end wrench for changing router bits. This ensures the wrench is always readily accessible and has its fixed place in the case
🔧 Template Guide Holder
The template guides are stacked space-savingly one above the other onto the cylindrical mandrel. This keeps all guides neatly sorted and quickly accessible
Each position has its own stop. This means even single or just a few template guides can be used securely – all sleeve sizes do not need to be present.
The holder is designed for original Bosch template guides with the following outer diameters:
- Ø 13 mm
- Ø 17 mm
- Ø 24 mm
- Ø 27 mm
- Ø 30 mm
- Ø 40 mm
Additionally, the Bosch centering pin also finds its place
What's included
The model consists of two print plates:
- Wrench Holder
- Template Guide Holder
The Template Guide Holder consists of two printed parts that are already arranged together on one print plate
After printing, both parts are simply screwed together with a screw M5x20 or M5x25
The two-part design was deliberately chosen to:
- save filament
- reduce print time
- enable support-free printing
Advantages
✔ Perfect utilization of free space in the case
✔ No more loose accessories
✔ Quick access to wrench and template guides
✔ Secure hold during transport
✔ No modifications to the original Bosch case required
✔ No drilling, gluing, or cutting necessary
Compatibility
These holders were exclusively developed for the Bosch Professional GOF 1250 CE.
They fit into the older original Bosch L-BOXX, as supplied with the GOF 1250 CE
⚠ Not developed or tested for the newer Bosch L-BOXX G4.
Please compare your case with the pictures before printing
Print settings
- Material: PLA or PETG
- Layer height: 0.20 mm
- Infill: 15–20 %
- Support: not required
I hope you enjoy the holders
I always appreciate a like, a rating, or photos of your printed models 😊
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)