Limbus Company Prescript Device M5StickC Plus2

Bring the Prescript to life with a functional prop built for the M5StickC Plus2.

Inspired by the iconic Prescript device from Limbus Company, this case is designed specifically for the M5StickC Plus2, creating a convincing display piece or cosplay accessory while keeping the screen fully visible and the top button fully functional.

The model consists of three printed parts:

• Bottom case
• Top faceplate
• Locking clamp

No additional hardware is required, and no print supports are needed. For the best detail and fit, a 0.2 mm nozzle is highly recommended. The case is intended to be printed in white, while the locking clamp should be printed in gold for an appearance faithful to the in-game design.

The case also features an integrated lanyard attachment hole and a small access hole on the bottom that allows you to gently push the M5StickC Plus2 out if it becomes stuck after assembly.

🔧 Features

• Designed specifically for the M5StickC Plus2
• Inspired by the Prescript device from Limbus Company
• Three-piece design: bottom case, top faceplate, and locking clamp
• No supports required
• No additional hardware required
• The top button remains fully functional while assembled
• Integrated lanyard attachment hole
• Bottom access hole for easy device removal
• Great for cosplay, display, or themed electronics projects

🖨️ Print Recommendations

• Nozzle: 0.2 mm is recommended for best results
• Supports: None
• Material: PLA recommended
• Case (Top & Bottom): White
• Clamp: Gold

Note: Due to printing tolerances, some fits may be tight. If necessary, dry assemble and dissassemble several times to loosen up.

🛠️ Assembly Instructions

1. Insert the M5StickC Plus2 into the bottom case. It will only fit in the correct orientation.
2. Place the top faceplate over the device.
3. Slide the locking clamp into place to secure the assembly.

Your Prescript device is now ready for display, cosplay, or everyday carry.