Starship V3 (1:130)
Print Profile(1)
Description
Starship V3. This model is approximately 1:130 scale. The ship is split up by the actual stacking sections that SpaceX stacks their full size starship. Each part screws together. Note that depending on the build plate the screw fit may be a bit tight or loose. I used a smooth plate for mine, and for the parts to line up correctly it is slightly loose. I recommend glueing the windward side (heat shield) to the leeward side. You'll need to glue the leeward “stainless steel” sections to the flaps.
Stacking goes as follows
Nose Cone (with forward flaps)
PX (payload section)
MX (methane dome)
CX (common dome)
A2
A3 + top part of aft flaps
EX + bottom part of aft flaps + raptor engines
The sections with the flaps are a bit tricky, use your best judgement on how to do it :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)