Pool Fountain Nozzle for Mountfield Azuro Vario

This is a 3D printable pool fountain nozzle designed for Mountfield Azuro Vario above-ground pools with a compatible return jet.

The nozzle is installed directly into the return jet opening and uses the existing water flow from the filtration system to create a simple fountain effect. It is a fun and practical pool accessory for summer days and can also help with water movement and aeration.

Installation

Installation is very simple:

1. Unscrew the original return nozzle.
2. Insert this fountain nozzle into the opening behind it.
3. Start the pool filtration and adjust the position as needed.

No additional pump or special tools are required.

Recommended material

I recommend printing this model from PET-G or ASA, because the part will be used outdoors and exposed to water, sunlight and temperature changes.

PLA is not recommended for long-term outdoor use, especially in direct sunlight or hot weather.

Compatibility note

This model was designed for Mountfield Azuro Vario pools with a compatible return jet.

Please note that some versions of Azuro Vario may use a different type of return nozzle, which may not fit this model. I recommend checking the compatibility with your exact pool model and return jet type before printing.