Insta360 Luna Ultra Selfie Stick Remote Mounts
Print Profile(1)
Description
This are Insta360 Luna Ultra Selfie Stick remote display mounting plates, using the same remote plate, you can now use it when extending your Luna Ultra on a selfie stick and still have easy control of the camera. Please note, there are 4 sizes to accommodate most selfie stick diameters out there. IF it's slightly too small or too big for yours, just use a heat gun to ‘soften’ the arms and form them accordingly. DO NOT over heat it will damage the mount.
** All printers/filaments will print differently with slight variances. I find the best way to get this to fit perfectly is to slightly heat up the clip with a heat gun and then 'form' fitting it on the Luna Ultra. DO NOT over heat or you will permanently warp the print and could damage the Luna's outer shell.
** Use this at your own risk, I am not responsible for any damage (s)from misusing this kit.
** With any 3D printing project especially with different types of printers, you will likely have to do some post sanding and finishing, this is the norm.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)