Fly Swatter long / Fly Swatter long - H2 / A2L

Reinforced fly swatter with a longer handle for large printers like Bambu H2 and A2L

This version has a longer handle and a reinforced design The new print settings

have worked well for me This makes the fly swatter more durable while remaining
flexible enough for use

For the A1/X1/P1/P2/X2D I have this fly swatter in my models

Recommended filaments:
Bambulab PLA Basic or other standard PLA I have achieved very good results with Bambu PLA Basic
Stiff TPU could also work very well (but I haven't tried it)

ABS or ASA might also work well
 

Not recommended:
PLA Matte, PLA Silk, PETG Matte, Rapid PETG and PETG with a matte finish These filaments are too brittle for this model TPU for AMS also did not work well for me In my opinion, PETG is not the first choice, even if you use PETG Basic
 

Important note on print files:
The holes in the swatter part are not created directly in the STL or STEP model They are created by special settings in the 3MF print profile Therefore, simply downloading the STL or STEP file makes little sense if you want to print the model unchanged

Please use Bambu Studio or OrcaSlicer To my knowledge, printing does not work correctly with Anycubic Next Slicer and Creality Print, as these programs do not correctly apply the settings for missing top and bottom layers

For smaller printers, please use my previous fly swatter model
 

Constructive feedback is welcome If you like the model, feel free to leave a comment, a rating for the print profile, and a photo of your print

Why is the model not even stronger/thicker and more robust Because you would then destroy your furniture with it, so it makes absolutely
no sense to make the model even stronger
 

Feel free to check out my other models