Phone Gaming Joystick
Print Profile(5)
Description
Boost Me (for free)
Please boost me 😀
Gaming joystick that can be used with most phones or tablets. For those times where you need tactile response.
ASSEMBLY
- Clips
- Slide the clips onto the “arms” attached to the joystick base.
- Be sure the loose clip ends are on the same side as the flat bottom of the joystick.
- Stylus Tip
- Remove the conductive stylus tip from a pen (meant to be used with the cheap stylus tips about 6mm in diameter, found on many pens that businesses give away, like these: https://a.co/d/04luJb0v).
- Insert into the center joystick hole, you will probably need a toothpick or pen core to get it in (meant to be a tight fit).
- Be sure to insert so that only a couple of mm of the tip protrude from the bottom, with the rest above for your thumb to contact.
- If the tip slips out, try a tiny drop of superglue.
- Attach to Phone/Tablet
- Open both clips and slide onto the corner of your phone or tablet.
If you have requests for basic tweaks just let me know.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (56)