Mars Armored Patrol Vehicle

Catalog => <Warship-Ship>-<Fighter-Aircraft>-<Vehicle-Tank>-<Aerospace>-<Miniature>-<Mecha>-<Weapon>-<Uncategorized>

Mars Armored Patrol Vehicle

The main cannon is pressable, the steering stick is movable, the nose cover is openable, the nose cannon and seat are rotatable, the top cover can slide back and forth, and the four rotors are rotatable and movable

For assembly, please download the assembly tutorial

Printing Tips:
Print Bed: Use a textured PEI plate.
Filament: Bambu Lab PLA. White, Black, Red, Yellow, Blue, Light Gray, Dark Gray, Orange.
Layer Height: 0.2mm
Outer Wall Count: 2
Acceleration: Set all accelerations to 1000 mm/s² or lower.
Important Notes:
Due to material shrinkage and printing tolerances, some sanding and gluing may be required. Apply even pressure when assembling parts.
Before printing, thoroughly clean the PEI print bed to ensure good adhesion and ensure your filament is dry.
Special thanks to all friends for your attention, likes, downloads, and support!

============================================================================

Single cockpit, movable wings and canopy, glue required for assembly.

placed and taken out.

Printing Tips:

Print Bed: Use a textured PEI sheet.

Material: PLA

Layer Height: 0.2mm

Outer Wall Count: 2

Acceleration: Set all acceleration values to 1000 mm/s² or lower.

Important Notes:

Some sanding and gluing may be required due to material shrinkage and printing tolerances. Apply even pressure when assembling parts.

Before printing, thoroughly clean the PEI print bed to ensure good adhesion, and ensure your material is dry.

Special thanks to all friends for your attention, likes, downloads, and support!