Infinite Lightweight Skadis Hybrid Wall Mount
Print Profile(1)
Description
A wall mount system for the Lightweight Infinite Skadis panels that keeps every peg-hole free. No drilling into the wall required. The panels attach to the mounts using the existing mounting holes, so your full pegboard surface stays available for accessories.
 | 
|
Compatible with Lightweight Infinite Skadis panels without standoffs: 160x160mm, 200x200mm, and 240x240mm (links below).
How it works
Attach the mounts to your wall or surface using double-sided tape. Then insert 4x20mm wood/chipboard screws through the mounting holes in the panel and screw them into the pegs. The panel is clamped securely between the screw head and the peg, with no peg-holes occupied.
The set covers any panel configuration
- 1 panel: 4x Single
- 2 panels horizontal: 4x Single, 2x Double Horizontal
- 2 panels vertical: 4x Single, 2x Double Vertical
- 2x2 grid: 4x Single, 2x Double Horizontal, 2x Double Vertical, 1x Quad
You can mix and match elements based on your layout:
| Component | Purpose |
| Quad Mount | Connects 4 panels together into one stable hub |
| Double Horizontal | Connects 2 panels side-by-side horizontally, useful in the top row and bottom row and it is essentially the bottom part of the quad. |
| Double Vertical | Connects 2 panels stacked vertically, will be required on the far left and far right columns and it corresponds to the vertical half of the quad. |
| Single Mount | For a single panel endpoint or areas without adjacent connections, single with a through hole are needed on the corners. |
Use the strongest double-sided tape you can find. Load capacity depends entirely on the tape used. Compatible only with Lightweight Infinite Skadis panels without standoffs by zomb (links below).
Update 05/07/2026: Fixed the Quad Mount orientation. The connector was mirrored along the X axis, which caused misalignment when connecting 4 panels at corners.
For easy alignment just check: Infinite skadis Alignment Tool
Prefer a no-screw solution instead? The Lightweight Infinite Skadis Wall Mount - No Screws lets you mount panels with tape only, no screws needed.
New to Lightweight Infinite Skadis? Start here:
| Model | For |
| Lightweight Infinite Skadis Board 240x240mm | A1/P1/X1 |
| Lightweight Infinite Skadis Board 200x200mm | A1+ |
| Lightweight Infinite Skadis Board 160x160mm | A1 Mini |
If you print it, please leave a make or rating. It helps a lot.
Boost Me (for free)
Hey! All my models are designed in the stolen hours between work, sleep, and pretending I'll go to bed early. Everything here is free - if something saved you a trip to the hardware store or just made your day a little easier, a boost is a great way to say thanks. Got questions, feedback, or a wild idea? Drop me a DM - I read everything, eventually. Thanks for stopping by!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)