Tactical Compensator for 14mm CCW (+ 18mm CW)

TRIGGER HAPPY - Tactical Design

Tactical Compensator for 14mm CCW & 18mm CW (CZ Scorpion EVO 3 A1)

A rugged, aggressive tactical compensator designed from scratch to complement modern SMG profiles. This model includes two distinct threaded variants to accommodate standard airsoft builds as well as the proprietary front end of the ASG CZ Scorpion EVO 3 A1.

Included Variants

1. 14mm CCW (Counter-Clockwise): Standard airsoft threading. Fits the vast majority of outer barrels, aftermarket extensions, and standard platforms.
2. 18mm CW (Clockwise): Specifically matched to the native, oversized proprietary threads found on the ASG CZ Scorpion EVO 3 A1 outer barrel, allowing you to mount it directly without needing bulky thread adapters.

Both versions feature precise internal thread tolerances to ensure a tight lockup and perfect bore alignment with your inner barrel.

Recommended Print Settings

Because compensators take direct muzzle blast (in HPA setups) and are prone to getting bumped against barricades, solid wall structure is mandatory.

• Material: ASA, PETG, or PA-CF (Nylon Carbon Fiber). Avoid standard PLA as it will brittle and crack under field impacts.
• Layer Height: 0.12mm to 0.16mm (Crucial for smooth, clean thread engagement without binding).
• Wall Loops: 5 to 6 walls minimum. The threaded base needs to be completely solid to handle tightening forces.
• Infill: 40% - 50% Gyroid for the main body blocks.

Or use my 3MF preset for PETG at 60% infill!

Orientation: Print vertically (threaded opening flat on the build plate). Use a outer brim to ensure stability during high-speed travel on the P1S toolhead.

Please, do not resell this under your name. I put a lot of time in it and I want to give it back for free.
If you feel like donating, here's the link to the project in Cults3D: https://cults3d.com/en/3d-model/various/tactical-compensator-for-14mm-ccw-18mm-cw-cz-scorpion-evo-3-a1

TRIGGER HAPPY trademark under EXITIUM.ORG