openipc image transmission gimbal 307/3516
Print Profile(1)
Description
openipc image transmission gimbal 307/3516
A very cost-effective openipc digital image transmission on 🐟 from Hardman's, within a hundred yuan including the air unit and ground unit, balancing image quality and latency, it is outstanding. However, there has been no compatible gimbal on the market, either too bulky or incompatible for installation. So I simply designed one, using an mg90s servo, a Sapphire mg90 also works. The occupied volume has been compressed as much as possible, and it can also be installed on some smaller planes/RC cars. It offers single-axis pan freedom; just print and install directly. The screws used are two m1.7 screws to fix the servo arm, and four m3 screws to fix the gimbal to the fuselage/car body.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)