Leather Knife Sheath Opinel No8
Print Profile(1)
Description
Boost Me (for free)
In the future, I want to release more models for leather crafting and models that I will design together with my son.
Please support our project!
With this mold, the basic geometry for a nice knife sheath for an Opinel No8 can be created.
The naturally tanned cowhide leather should be approximately 2-3 mm thick and uncoated.
Briefly place this in warm water, then press the core under the leather and the large mold from above over the leather, and fix it to the base with clamps.
If desired, press on the decoration and let the entire clamped piece dry overnight.
After the molded piece has been produced, the remaining parts are measured, made, and punched accordingly
top left: belt loop
top right: back with flap
middle left: closure strap with embossed initials (individual)
bottom: molded piece with pattern embossing
Afterwards, dye the leather as desired, either by dabbing, brushing, dipping, or airbrushing.
Then sew the dyed parts accordingly with a saddle stitch.
Then trim the sewn piece at the edges and smooth the edges, this works best with Tokonole and an edge slicker.
Recolor the edges and done.
It doesn't take much crafting skill to create such a unique piece, you can do it too!
If you need help, feel free to contact me.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)