BattleSpiner Arena

⚠️ Before you print:
This arena takes quite a while to print, so it's worth taking a minute to prepare your build plate first. A quick clean with isopropyl alcohol or warm water and dish soap can save you from a failed print and a lot of wasted filament.

After spending quite a bit of time designing the Spinblade BattleSpiner, it felt natural to give it a proper place to spin.

The arena is printed at an angle and features an oval shape with a gently curved floor. This naturally guides the spinners back toward the center, helping keep the battles going instead of letting them settle around the edges. The print profile also includes custom supports, designed to make removal easier while keeping the visible surfaces as clean as possible.

If you're printing the Spinblade launcher and disks, this arena is a nice addition to complete the experience.

---------------------------------------------------------------------------------------------------

I put a lot of personal time into each project I share here 🕒❤️. I do it knowing there's no real profit—apart from sharpening my skills 🛠️ and the joy of contributing something useful or fun to others 😊.
The points I earn on this platform help cover only a small part of the filament I use to create these models 🎯.

If you ever run into printing issues, please take a moment to check if the cause might be on your end 🔍🖨️.
Even with all the advancements in 3D printing, proper calibration, bed adhesion, filament choice, and profile settings still play a big role in the final result ⚙️🎛️.

Negative ratings affect a project’s visibility 📉 and reduce the number of downloads, even if the issue wasn't with the model itself.
If something's not working, please don’t hesitate to message me 💬—I'll do my best to help or clarify things 🙌.

This is just a small part of my life, but it’s a big part of my passion 💡. I’m constantly learning and improving 📚, and your thoughtful feedback makes a huge difference 💬🌱.