Summary

Hood for CTC Dual

This is my hood for the CTC Dual.
The drawings are for 6mm wood and 3mm Acrylic glas

The printed items are printed in ABS with 0,2mm and 20% infill.

Print Settings

Printer:

CTC Duplicator4

                                            Rafts:                      
No
                                                                                Supports:                      
No
                                                                                Resolution:                      
0,2
                                                                                Infill:                      
20%

How I Designed This

I designed the 3D parts by the use of SolidWorks.

            I also designed the wooden parts by the use of SolidWorks and created the 2D drawings afterwards. The clip with the pin was intended to hold the big cover (Deckel gross) and make it slide able. Unfortunately it works too good - you are not able to slide the cover in and out.
But of course due to the clips you can lift up the cover easily.