Rasta Shroom - No AMS

Rasta Shroom - No AMS Multipart

He Always had to watch from the sideline, now it's time to put him in the spotlight!
Get ready to level up your shelf with the most relaxed power-up on MakerWorld! 🍁🍄

Created to bring you the highest quality, most colorful 3D model possible WITHOUT needing an AMS / MMU system!
 

Every single part is printed separately in its own color and fits together seamlessly. No paint, no color bleeding, no wasted filament... just a dab of glue here and there, and pure technical craftsmanship.

🛠️ Design Features & Clever Engineering
🚫 No-AMS Multipart Magic: 100% optimized for single-extruder printers.
♻️ Zero Waste: No purge blocks, no wasted filament, and no endless color swaps.
🧩 26-Piece Puzzle: An incredibly satisfying, fun, and clean assembly experience. (A small snack for in between).
📏 10cm Tall (Scalable): Stands 10cm high at 100% scale. Feel free to upscale for an even bigger model, but downscaling is NOT recommended, as tiny parts like the eye glow and tongue will become impossible to print!
📈 Foolproof .3MF Included: All parts are neatly organized and pre-sorted on separate print beds by color for an easy print workflow.
 

📋 Assembly Instructions

• Orientation Warning: All parts are pre-sorted on the print plates on their correct side/position. Try not to mix them up, or they might not fit! (When in doubt, check the object names in your slicer).
• Prep Work: Make sure all support material is completely and cleanly removed before assembling.
• Final Touch: Finish off all low-friction parts with a dab of glue to make the entire model solid.

Should be self-explanatory.. But just in case.

• The yellow, red, and green cap segments are held together by internal angled pins. Once you slide the brown bottom ring onto the base pins, it acts like a vice, locking the entire cap firmly and seamlessly into place!(no ugly support textures on the visible parts!).
• Put in the red, gold and organo leaf badge 😅 & the shroomdots (which are oriented on the plate to their exact location) with a dab of glue.
• Glue in the eyes and tongue.
• Finish off by sliding the bottom part in to the hat.. And your Rasta shroom is ready to make Mario & Luigi fly really hiiiiigh. 😅    

🫶🏼 I am combining this passion for 3D design with a demanding full-time job, spending all of my free time to make these models perfect and foolproof. If you appreciate all the hours of work that went into this project, please consider showing some love!
A nice message in the comments, a picture of your finished print, a simple like, or maybe even a Boost Token keeps me motivated to create more for you guys. 🙏

Enjoy the print, share your awesome makes, and let the Rasta family take over your print bed!🚀🌱 🫶🏼

The perfect 🍄Power-UP for these two! 😎