raptor swimbait (srcew eye version)

Raptor Swimbait – Screw Eye Version 🦖🐟

Welcome to the Raptor Swimbait, a high-performance,jointed swimbait designed for serious anglers and 3D printing enthusiasts alike. This is the Screw Eye Version, optimized for maximum strength and smooth, lifelike swimming action using standard stainless steel screw eyes.

Whether you are targeting bass, pike, or muskies, the Raptor Swimbait delivers an irresistible S-wave action on a steady retrieve and erratic darting action when twitched.

🛠️ Specifications & Hardware Required

To assemble this model, you will need the following hardware:

• Screw Eyes: Stainless steel closed screw eyes (Recommended size: #2 or #4 depending on your scaled print).
• Split Rings: #3 or #4 heavy-duty split rings.
• Hooks: Two treble hooks (Size #2 or #4 recommended for standard scale).

⚙️ Print Settings & Recommendations

For the best durability and water resistance, please use the following settings:

• Material: PLA
• Perimeters/Walls: 2 walls
• Infill: just use print profile or add a modifier to the bottom half of the model.
• Layer Height: 0.2mm for smooth joint transitions and less post-processing.
• Supports: no supports

🧩 Assembly Instructions

1. Install Screw Eyes: Apply a small drop of waterproof epoxy or super glue to the threads of the screw eyes, then screw them securely into the pre-modeled pilot holes.

    

2. add hardware: add your split ring to your screw eye, and your hooks to that.
3. Finish: Rig your split rings and treble hooks, paint your favorite forage pattern, and clear-coat with a UV-resistant epoxy for maximum durability.

📣 Share Your Catches!

If you print and fish the Raptor Swimbait, please post your makes and share your catches in the comments! Don't forget to boost the model if you love the action! 🎣

if you like models like these go check out my profile for more amazing models.