Breathable Orchid Pot 2.0

This is the second version, a more oval modification based on the previous cylindrical orchid pot.
The link to the first version is as follows:
https://makerworld.com.cn/zh/models/2679147-lan-hua-hua-pen#profileId-3099850

1. 3*6 ventilation holes around the pot body,

2. 19 ventilation holes + 12 drainage holes at the bottom;

Regarding printing precautions (also printing experience):

Since each user's filament varies, I will provide printing suggestions so that everyone can achieve successful prints on the first try

1. It is recommended to print using structural filament (e.g., PETG, for durability);

2. The filament parameters use the official default PETG Basic profile, because most filament companies develop and produce to adapt to these parameters, so temperature may vary, please adjust accordingly (it is recommended to consult the filament manufacturer)

3. It is recommended to use an enclosed 3D printer for printing and add a brim (except for a cold build plate). If an open 3D printer needs to be used for printing, it is recommended to add a brim (default already added);

4. It is recommended to use build plate adhesive spray to improve printing success rate (a cold build plate can also be used, in which case no adhesive spray is needed);

Model size information is as follows:

External dimensions: 150*150*240mm;

Inner diameter of opening: approximately 130mm;

Inner bottom diameter: approximately 96mm;