Summer by the Sea - Coastal Relief Bowl (Large)

This large bowl was inspired by warm summer days at the coast—lazy, relaxing hours at the beach, letting the sand run through your fingers, and the familiar smells of the ocean, sunscreen, and ice cream.

Those days often end with a quiet evening and plenty of snacks, so I wanted to create a bowl that could be both beautiful coastal decor during the day and practical when the snacks come out later.

The result is a decorative bowl featuring a detailed relief of waves, shells, reeds, a lighthouse, and a sailboat beneath the summer sun. I hope it brings some of those happy summer feelings into your home as well.

There is a smaller version (without the lighthouse) available here: https://makerworld.com/en/collections/29887341-coastal-home-decor

The bowl was printed with Colorful Mist (Matte Multicolor 3 in 1) -  ZIRO: https://www.amazon.com/dp/B0CBPX5GTQ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3&th=1

If used for food items, consider printing with food-grade safe PLA.

Printing

• Use a clean print plate with some glue (unless you are using a super tack plate)
• Use dried out filament
  • (Different filament types impact the print differently, please adjust your settings accordingly. If printing with silk PLA, then I recommend to adjust the Speed Outer wall setting to 40mm/s and Tope Surface to 40mm/s.
• Minimal Support is needed 

Support Removal:

1. Let the model cool down before removing the supports.
2. Use pliers when removing the supports.
3. Gently break the support off starting at the middle by breaking the support in the middle.
4. Move to the top and remove the support gently.

5. Remove the remaining support from the bottom.

    

For more coastal/nature inspired decor, go here: https://makerworld.com/en/collections/29887341-coastal-home-decor

If you like this design, please leave a rating, a comment, or a boost.