Meaco MeacoCool MC (maybe others) Machine Adaptor

I may have broke my AC pipe connector, during a heatwave, for my MeacoCool MC so i modelled a new one with different size connectors. My CAD isn't the best at threading, so you will need a hose clamp to tighten them down. Seems to hold pretty well and I move it about a lot. I am going to attempt some threading in the future now it has cooled down a bit and i have working AC ;)

From images alone, this might work with the Cirro. I don't know.

Connectors for 100mm and 150mm pipe. For the 100mm there is a Short and a Long connector. I found the short connector can cause short cycling (cool for a minute then just fan for 5 minutes, repeat) I recommend the long connector for 100mm as its funnels the air down a lot more gradual. But both can cause short cycling if the connected pipe has tight bends, especially close to the unit. If you find you have issues, straighten out your pipe.

ABS/ASA, something high temp recommended. Regularly gets above 60c on the exhaust. PETG profile included for A printers, but the exhaust is close to the glass transition temps of PETG, so I do not recommend.