Tuttio Soleil 01 Seat Quick Release (REAR FENDER)
Print Profile(1)
Bill of Materials
Description
Tuttio Soleil 01 Seat Quick Release
This seat quick release is designed for the Tuttio Soleil 01 to make removing and reinstalling the seat much faster and more convenient. It eliminates the need to repeatedly thread the factory fastener, making battery access and maintenance much easier.
Installation
- Thread the quick release onto the seat mounting threads with the lever facing upward.
- Rotate the quick release so the flat side of the lever is aligned with the front of the seat.
- Tighten until secure.
Installing the Seat
- Slide the seat as far forward as possible.
- Push down firmly on the rear of the seat until you hear two clicks.
Removing the Seat
- Push upward toward the seat on the quick release lever.
- Lift the rear of the seat off.
Important: Do not pull outward on the lever when removing the seat. The lever is designed to be pushed upward, and pulling on it may cause it to break.
If you enjoy this model, please consider leaving a like, rating, or posting a make. It helps support future designs and improvements!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)