Print Profile(1)
Description
Functional Arcade Style Light Switch Cover
Here is a small cover that I designed with a functional joystick to give your interior a retro arcade look, inspired by arcade cabinets, ideal for gaming rooms, playrooms, etc
Please note: Dimensions are not the same depending on the switch manufacturers and the country
Before printing, please measure the height, width, and depth (including the switch) of your switch to adjust the x y z dimensions (non-uniform), this model is designed for a switch that is 82mm per side. For tolerance, set it between 0.08mm and 0.14mm depending on your printer and switch
The joystick ball is screwed onto the shaft, for a good hold, please insert the shaft with a piece of double-sided tape under the shaft plate, then slide on the cover and screw on the ball
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (2)