Exaustor 3.0 / Extractor 3.0
Print Profile(0)
Description
The Exhaust Fan 3.0 is high-performance, modern, compact, and stylish. It is designed for 8038 or 8025 fans and for connection to 75mm tubes to create an air or exhaust duct, or even for those who work with component soldering. I used a dual-voltage 8038 fan for my exhaust system for my K1, K1 Max, and Anycubic Photon resin printers, which expels all the fumes out of the house. If you want to create a similar system, I will also leave the LINK to the STLs so you can make one too ⬇️⬇️
Flange + Pipe Sleeve (75mm)⬇️
https://makerworld.com/en/models/2985336-flange-pipe-sleeve-75mm
75 mm Pipe Connector⬇️
https://makerworld.com/en/models/2985551-75-mm-pipe-connector
En (google Translate): The Exhaust Fan 3.0 is high-performance, modern, compact, and stylish. It's designed for 8038 or 8025 fans and can be connected to 75mm tubing to create an air duct or exhaust system, or even for those who work with component soldering. I used a dual-voltage 8038 fan for my exhaust system for my K1, K1Max, and Anycubic Photon resin printers, which expels all the fumes outside. If you want to make a similar system, I'll leave the link to the STL files so you can do it too ⬆️⬆️
License
Comment & Rating (0)