Monstera Leaf Planter Collection

Give your plants a special place with this set of four botanically inspired cachepots

Included are designs featuring the leaves of

• Monstera deliciosa

• Monstera adansonii

• Monstera dubia

• Rhaphidophora tetrasperma

Each cachepot was specifically designed for my self-watering system, combining modern, simple design with the characteristic leaf shapes of popular aroids. This creates decorative planters that harmoniously blend into any plant shelf or home decor

The print files exclusively contain the cachepots. Details on which inner pots, water reservoirs, and other accessories are required for each size can be found further down in the description

I hope you enjoy printing and that your plants like these pots as much as I enjoyed designing them 🌿

# 💧 Self-Watering System

All sizes are designed for use as self-watering pots

The actual plant pot sits in the upper section. Below it is a separate water reservoir

Through a capillary wick, which is guided through the bottom openings of the orchid or aroid pot, the plant can autonomously absorb water from the reservoir. This allows for a consistent water supply and significantly extends watering intervals

For all sizes, care has been taken to ensure that the inner pots can be easily removed from above without having to manipulate inside the pot

---

# 👀 Viewing Window (optional)

On the back there is a viewing window, through which the water level and root development can be conveniently checked without having to remove the inner pot

The viewing window is designed as an optional negative and can be activated or deactivated in Bambu Studio as needed

### With Viewing Window

✅ Water level control

✅ Root development control

✅ Ideal for orchids, alocasias, and other aroid plants

### Without Viewing Window

✅ Closed outer wall

✅ Use as decoration

✅ Use as a vase

✅ Use as a pen holder

✅ Use as a general storage container

---

# 📏 Sizes

## Size S

* Suitable for a clear orchid pot with **6 cm diameter**

* Water reservoir: **100 ml plastic cup**

* Capillary wick can be easily threaded through the orchid pot

* Easy insertion and removal of the inner pot

---

## Size M

* Suitable for a clear orchid pot with **7.6 cm diameter**

* Water reservoir: **200 ml plastic cup**

* Capillary wick can be easily threaded through the orchid pot

* Easy insertion and removal of the inner pot

---

## Size L

* Suitable for a clear orchid pot with **9 cm diameter**

* Water reservoir: **400 ml plastic cup**

* Capillary wick can be easily threaded through the orchid pot

* Ideal for larger plants with higher water requirements

---

## Size XL

* Suitable for a **10 cm Aroid pot**

* The Aroid pot is deeper and intentionally extends slightly beyond the top edge

* This allows for particularly comfortable removal of the inner pot

* Water reservoir: **500 ml plastic cup**

* Capillary wick can be easily threaded through the Aroid pot

---

# ⚠️ Important Note

The print files exclusively contain the decorative outer pots

The following components are **not part of the STL files**

* Orchid pots

* Aroid pots

* Plastic cups for the water reservoirs

* Capillary wick

These components must be acquired separately

The required orchid pots, aroid pots, plastic cups, and capillary wicks are readily available from the big A

The outer pots serve as a decorative cover and transform simple planters into a visually appealing self-watering system

---

All product images are personally photographed by me at home at the dining table and are not AI-generated renderings

I show the printed models exactly as they come out of the printer – without artificial enhancements or unrealistic depictions

Each file is personally test-printed by me in all offered sizes before publication to ensure fit, printability, and the best possible result. This way, you can download and print the models with confidence

---

# 🖨️ Printing Instructions

* No scaling required

* Each size has been adjusted separately

* Optimized wall thicknesses for each size

* Optimized leaf details for each size

* Suitable for PLA, PLA+, PETG, and comparable materials

* For optimal results, a fine layer height is recommended

---

# 📜 License

These files are for private use only

Not permitted are

❌ Sale of digital files

❌ Distribution of digital files

❌ Dissemination of files on other platforms

❌ Sale of printed copies

❌ Commercial use of any kind

By downloading, you agree to these terms

# 📜 License

A commercial license can be acquired via Makerworld as part of a commercial membership

# 📜 License

---

# ❤️ Support

If you like my models, I would be delighted with a like, a make, or a photo of your print

It is especially nice to see which plants have found a new home in the pots

If you share your prints on social media, I would greatly appreciate a tag

📸 **Instagram: @marbledjungle**

🎵 **TikTok: @marbledjungle**

Thank you for your support and happy printing! 🌿