Bissell Little Green Pet Cleaner Solution Tank Cap
Print Profile(1)
Description
Bissell Little Green Pet Deluxe (3353) — Solution Tank Cap
A replacement for the threaded cap on the clean/solution tank of the Bissell Little Green Pet Deluxe (model 3353). This is the purple collar in the photos — the part that screws onto the bottom of the clear "SOLUTION/CLEAN TANK."
Important: this is the cap only. It's designed to reuse with your original black cap insert (the valve/nipple piece). Pop the OEM insert out of your old cap and seat it into this one — the center hole is sized to capture it. If your insert is also damaged, this print won't help you there; you'll still need that piece from Bissell (it's sold as the "Cap Insert Assembly," part 2035014).
Fitment
Verified on my own Little Green Pet Deluxe, model 3353. I haven't tested it against any other Little Green variants (Max Pet, Pet Pro, HydroSteam, Mini, etc.), so I can't promise it fits those — measure twice before you commit a long print.
Material & print notes
I printed mine in PLA, and it's held up fine for my use. One caveat worth knowing: Bissell says you can fill the tank with warm (not boiling) water, and PLA softens at fairly low temps. If you run warm solution, print this in PETG instead — it shrugs off heat and moisture far better and is the right call for anything that holds liquid long-term. ASA/ABS work too if that's what you've got.
- No supports needed
- Print threads-up so the threaded face comes off the plate clean
- A few perimeters for a solid, watertight-ish wall
If something doesn't fit on your machine, drop a comment with your model number and I'll take a look. Happy printing!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)