Ultimate Bubble Popper Fidget Toy (Print in Place)

This bubble popper fidget toy delivers one of the most satisfying and tactile experiences you can get from a 3D print! Each button is carefully engineered to push in with a crisp pop, snapping out the other side every single time. Every component was meticulously prototyped to dial in the perfect feel across every button. The set includes four sizes — a single bubble, a compact 2x2, a 3x3, and a large 4x4 giving you options so you can choose the right size for your situation and filament budget. Since everything is entirely print-in-place, every piece comes off the build plate ready to use with zero assembly required. Each piece features a decorative geometric pattern on top and a ribbed edge on the sides that looks great and feels premium in the hand. The Ultimate Bubble Popper Fidget Toy is the perfect print for anyone who loves a good fidget, with four sizes to suit every maker.

Printing Instructions:

1. Prepare the Print Bed
   • Clean the print bed thoroughly with isopropyl alcohol to ensure proper adhesion.
   • Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or a glue stick.
      
2. Download the Print Profile
   •  
   • Send the pre-configured print profile to your Bambu Lab printer through the Bambu Handy app or Download and open the pre-configured print profile in Bambu Studio.
      
3. Select Your Printing Options
   • Choose your filament type and color.
   • Select your print bed type (e.g., textured or smooth).
   • Confirm your printer settings, ideally for a Bambu Lab printer.
      
4. Start Printing
   • Begin the print job. No supports are necessary.