2-Drawer Organizer - Hexagonal Pattern - No AMS

Stylish Stackable 2-Drawer Desk Organizer

I designed this desk organizer with a hexagonal pattern in several parts.

This is a new model that offers chamfers for more elegance, unlike the Voronoi pattern one. (If you would like the Voronoi pattern also with chamfers, please ask, and I will make a new version available)

You will find two different versions in the 3mf file.

• If you want to Print in Place, this will prevent you from using a different color for the tray. I still wanted to include it in the file, but you can delete it to print only the assembly kit.
• For the assembly kit (which is much faster to print), it consists of 2 parts and two drawers. You will need cyanoacrylate glue (super glue) to assemble it properly.

!!! I recommend doing a dry assembly before gluing !!!

!! The tray has a direction, don't get it wrong !!

Obviously, you can choose the colors you want for the base and the tray.
The model is designed so you can stack them on top of each other if you print several.

To assemble it, you will only need to:

• Carefully identify the orientation of the tray (you normally can't go wrong, one side is longer than the other and inserts into the tenons)
• Do a dry assembly to identify the assembly direction. There should be no play/offset between the upper and lower trays

• Once the parts are properly identified, you can proceed with gluing using “Superglue” or any cyanoacrylate glue will do the job

   

Once these steps are done, enjoy your new desk organizer. Feel free to print others to stack them on top of each other and make your desk a pleasant and elegant place

I am obviously open to any improvement, constructive criticism and feedback on this project.

If you like my work, feel free to like, boost and send photos of your prints!!