Elegant Twisted Vase
Print Profile(1)
Description
# đ Elegant Twisted Fluted Vase (Premium Solid Version)
Add a touch of modern elegance to your home with this beautiful, organic fluted vase. Featuring a gracefully twisted, wavy silhouette and a flared rim, this design captures light beautifully and creates striking geometric shadows.
Unlike standard thin-walled vase-mode models, this version is designed to be printed as a **solid shell with infill**. This gives it excellent structural strength, thick walls, and a premium, heavy feelâperfect for holding heavy floral arrangements safely.
---
###Â
Boost Me (for free)
đ BOOST ME! đ
If you love this design and successful print, **please consider leaving a 5-star review and throwing a BOOST my way!** âĄ
Your boosts and photo reviews help me dedicate more time to designing, testing, and uploading high-quality models for the community! Thank you so much for your support! đ
You don't need to but if you like spreading happiness it would be great
---
### âď¸ Recommended Slicer Settings
For the absolute best results, do **NOT** use spiral vase mode. Use these settings in Bambu Studio or OrcaSlicer:
* **Wall Loops:** 3 to 4 perimeters (for a strong, premium exterior)
* **Infill:** 10% - 15% (Gyroid recommended for uniform strength)
* **Supports:** **ON** (Use **Tree / Organic** supports to cleanly support the overhanging flared rim)
* **Top/Bottom Shell Layers:** 4 layers each
* **Layer Height:** 0.2mm for standard prints, or 0.16mm for ultra-smooth ridges
---
### đ¨ Filament Recommendations
* **Silk PLA:** Hugely recommended! The shiny finish accents the twisted ridges beautifully.
* **Dual/Triple-Color Matte PLA:** Creates a stunning color-shifting effect as you walk around the wavy geometry.
* **Marble/Stone PLA:** Gives it a heavy, high-end ceramic look.
---
### đ§ Watertight Printing Tip
Because this is printed with traditional infill and perimeters, it is inherently more watertight than a single-walled vase. To ensure it holds real water 100% safely, slightly increase your **Nozzle Temperature by 5-10°C** and increase your **Flow Ratio/Multiplier to 1.02** to fuse the layers tightly.
Â
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)