Mitsubishi 3000GT Door Switch Bezel LH/RH

This is a replacement Door Power Window Switch Bezel for the Mitsubishi 3000GT, including both LH and RH versions.

The original mounting tabs are easy to break during removal, so I redesigned the rear mounting structure to keep the appearance and fit as close to the OEM part as possible while making future repairs easier.

For RHD vehicles, simply mirror the model before printing.

Since the original 3000GT door panels are made from compressed fiberboard, slight dimensional differences may exist due to age and wear. This model was reverse-engineered from an original part and has been test-fitted on an actual vehicle.

Instead of using the factory metal retaining clips, this design uses 2 mm steel rods. Simply cut them to the required length and insert them into the mounting holes to secure the bezel.

The mounting holes for the power window switch assembly are retained, and the screw bosses already include 5 mm threads. Simply install the original screws. Do not tap machine threads.

This model was designed using ABS-CF and already includes the optimal print settings and support placement. Unless you have extensive printing experience or need to troubleshoot failed prints, it is recommended not to modify the print settings, as doing so may affect fitment, strength, and functionality.