Lay-Z-Spa pump to Gardena adapter

Lay-Z-Spa → Gardena Adapter

With this adapter, the outlet of a Lay-Z-Spa pump can be converted to a standard Gardena connection. This allows the outgoing water to be easily redirected via a garden hose or used for various applications. The attachment can be placed on the original

outlet of the pump with slight pressure and a clockwise twist.

Possible uses

🔹 Controlled pumping of pool water via a garden hose
🔹 Emptying the pool to a desired location without the water running out uncontrollably
🔹 Connecting a self-built waterfall or shower attachment for the pool
🔹 Supplying small DIY water projects with the pool pump (e.g. fountains or water features)
🔹 General experiments or DIY projects with a Gardena hose system

Important note

🔸 For a tight connection, a normal Gardena sealing ring (rubber gasket) is required. This is not part of the print model and must be inserted into the Gardena connection to prevent leaks.

Printing instructions

🔹 Support material is absolutely necessary for printing!
🔹 A layer height of 0.2 mm already delivers very good results.
🔹 For the highest possible stability and impermeability, at least 3–4 outer walls and a sufficiently high infill are recommended.

Therefore, I recommend using my print profile.

Disclaimer

This model was developed for private use. Since print quality and material can vary depending on the printer, the adapter should be checked for leaks before its first use. Furthermore, the connected hose should not impair the pump's operation to avoid major damage to the pump. Use is at your own risk.