Birds Collection #1 - The Toucan NO AMS / Low-Poly

DOES NOT REQUIRE AMS

Please read the instructions before printing

Here is the first model in the “Birds Collection (Vol. 1: The Toucan)” series.  Other models coming soon

It is a minimalist and modern sculpture in a low-poly (polygonal) style, strongly inspired by the geometric patterns of origami. 

The original composition measures 23 x 17 cm and is enclosed within a white shadow box frame, suitable for enhancing the volumes and shadow play created by the pieces: a simple, yet highly effective frame

These contemporary artworks combine the minimalism of geometric lines with the vibrancy of tropical nature's colors, making them ideal design elements for decorating modern living rooms, offices, or entrances. This series brings a modern artistic approach to living spaces, inspired by nature

From children's bedrooms to workspaces, it is a decorative element for anyone who loves art. A fun and energetic reinterpretation of modern art can now decorate your walls.

Equipped with two rear holes for hanging. 

Printing instructions:

The colors used are PLA Basic Bambulab White, Black, Orange, and Yellow. 

I recommend printing the light pieces first, then the dark ones

The colors of individual objects can be changed in the slicer at the time of printing. 

Assembly guide:

Insert the pins into the base (tablet) using pliers, then press the pieces into place, guiding yourself with the following images:

I recommend putting a little Bostik or T-8000 type glue on the pieces (including the frame) before interlocking them (see photo)

GENERAL TIPS 

A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then dry it with compressed air, avoiding touching the surface with your hands. I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. These small measures, along with many others, are what determine the success of a good print

Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to encounter problems, do not hesitate to contact me; together we will find solutions in a perfect collaborative atmosphere. I have made several prints of this object, and all of them came out perfect, as in the photos: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, or damp or poor-quality filaments, do not blame me.

PRINTING INSTRUCTIONS:

• NO AMS
• Layer height 0.2 mm
• Initial layer height 0.2 mm
• Seam position aligned
• Wall loops 2
• Top shell layers 5
• Bottom shell layers 3
• NO supports
• Infill 15 %
• Infill pattern Grid
• Outer wall speed 200 mm/s
• Inner wall speed 300 mm/s
• Normal print acceleration 10,000 mm/s
• Outer wall acceleration 10,000 mm/s