Haute42/COSMOX C16 plate - 2XKO

A custom plate for the Haute42/COSMOX C16 leverless, inspired by Riot Games’ fighting game 2XKO.

For the settings, the most important is to:

• Set only one wall on first layer
• Drastically reduce the print speed of the first layer (arround 20/30 mm/s)
• Reduce width of the first layer (0.32mm for 0.4mm nozzle)

The plate stays in place without these. But to finish it off properly, you’ll also need four 6×1mm neodymium disc magnets, which need to be glued into the recesses in the corners.

⚠️Disclaimer⚠️

This 3D model is an unofficial, fan-made creation. I do not own and do not claim any rights to the logos, names, characters, designs, artwork, symbols, trademarks, or other intellectual property featured in or referenced by this file. All such elements are the property of Riot Games, Inc. and its respective rights holders.

This file is shared free of charge, on a non-commercial basis, as a tribute by a fan. It is not endorsed by, affiliated with, or sponsored by Riot Games.

If any rights holder objects to this content, please contact me and I will promptly remove it.